Преобразователь
частоты (инвертор) фирмы Omron CIMR-L7
OMRON CIMR-L7 - Регулятор скорости вращения (инвертор) Varispeed
L7
Инвертор
для лифтов
OMRON
CIMR-L7 - инвертор для систем управления лифтами со
скоростью подъема до 3 м/с. Высокий пусковой момент,
бесшумная работа, операторский интерфейс, адаптированный
к специфике управления лифтами, совместимость с
двигателями переменного тока и с двигателями на
постоянных магнитах - таковы возможности любой модели
инвертора CIMR L7.
Одна и та же модель
для управления двигателями переменного тока и
двигателями с постоянными магнитами
Бесшумная работа
без снижения тока
Бесшумная работа
Прекращение работы
согласно требованиям 3-й категории безопасности.
Обеспечивается соответствие категории 0. Питание от
аккумуляторных батарей в аварийном режиме.
Определение
параметров двигателя (автонастройка) с вращением и без
вращения
Outputs isolated type digital signal for monitoring inverter run state
(alarm signal, zero speed detection etc.) .Output channel: photo coupler 6 channels (48 V, 50 mA or less)
Relay contact output 2 channels (250 VAC, 1 A or less, 30 VDC, 1 A or less)
DO-02C / 3G3IV-PDO02C
2C-relay output card
Two multi-function contact outputs (2C-relay) can be used other than those of the inverter
proper unit.
Платы обратной связи
Model
Description
Function
PG-A2 / 3G3FV-PPGA2
PG speed controller card
(Used for V/f control with PG or Flux Vector)
Phase A pulse (single pulse) inputs (voltage, complementary, open collector input)
PG frequency range: Approx. 30 kHz max.
[Power supply output for PG: +12 V, max. current 200 mA]
Pulse monitor output: +12 V, 20 mA
PG-B2 / 3G3FV-PPGB2
Phase A and B pulse inputs (exclusively for complementary input)
PG frequency range: Approx. 30 kHz max.
[Power supply output for PG: +12 V, Max. current 200 mA]
Pulse monitor output: Open collector, +24 V, Max. current 30 mA
PG-D2 / 3G3FV-PPGD2
Phase A pulse (differential pulse) input for V/f control (RS-422 input)
PG frequency range: Approx. 300 kHz max.
[Power supply output for PG: +5 V or +12 V, Max. current 200 mA]
Pulse monitor output: RS-422
PG-X2 / 3G3FV-PPGX2
Phase A, B and Z pulse (differential pulse) inputs (RS-422 input)
PG frequency range: Approx. 300 kHz max.
[Power supply output for PG: +5 V or +12 V, Max. current 200 mA]
Pulse monitor output: RS-422
PG-F2
Hiperface and endat encoder option.
Коммуникационные платы
Model
Description
Function
SI-N1
DeviceNet option card
Used for running or stopping the inverter, setting or referencing parameters,and monitoring output frequency, output current, or similar items through DeviceNetcommunication with the host controller.
SI-P1
PROFIBUS-DP option card
Used for running or stopping the inverter, setting or referencing parameters,and monitoring output frequency, output current, or similar items through PROFIBUS-DPcommunication with the host controller.
SI-S1
CANopen option card
Used for running or stopping the inverter, setting or referencing parameters,and monitoring output frequency, output current, or similar items through CANopencommunication with the host controller.It supports DSP402 CANOpen standard protocol for drives control in speed control.
SI-J
LONWORKS option card
Used for HVAC control, running or stopping the inverter, setting or referencing parameters, and monitoring output current, watt-hours, or similar items through LONWORKS communications with peripheral devices.
Опциональная плата задания
Model
Description
Function
AI-14U / 3G3IV-PAI14U
Analog input card
2 channel high resolution analog input cardChannel 1: 0 to 10 V (20 kΩ)Channel 2: 4 to 20 mA (250 Ω)Resolution 14 bit
AI-14B / 3G3IV-PAI14B
3 channel high resolution analog input cardSignal level: -10 to +10 V (20 kΩ)4 to 20 mA (250 Ω)Resolution: 13 bit + sign
DI-08 / 3G3IV-PDI08
Digital reference card
8 bit digital speed reference input card
DI-16H2 / 3G3IV-PDI16H2
16 bit digital speed reference input card
Опциональные платы ПЛК
Model
Description
Function
3G3RV-P10ST8-E
PLC option
Full PLC features, wireless installation and seamless access to the inverter parameters and analogue / digital inputs and outputs.Embedded Compubus/S fieldbusStandard OMRON tools can be used for programming
3G3RV-P10ST8-DRT-E
PLC option with DeviceNet
Same features than standard models with DeviceNet support.
Цифровые пульты оператора
Model
Description
Function
JVOP-160-OY
5 lines LCD digital operator
7 language support
Configuration and monitoring device.
JVOP-161-OY
7 segment LED digital operator
Кабели
Model
Description
Function
3G3IV-PCN126
3G3IV-PCN326
Digital operator extension cable
1 meter
3 meters
Cable to concect the inverter and the digital operator when it's not plugged into the inverter.
