Преобразователь
частоты (инвертор) фирмы Omron CIMR-F7
OMRON CIMR-F7 - Регулятор скорости вращения (инвертор) Varispeed
F7
Инвертор для
широкого спектра промышленных применений
На фоне других преобразователей частоты инвертор OMRON CIMR-F7 выделяется своей
надежностью, удобством и универсальностью. Он
предназначен для решения любых стандартных задач,
которые могут возникнуть на обычном промышленном
предприятии: от простого управления насосом с переменным
значением вращающего момента до создания сложной
разветвленной системы транспортировки материалов.
Благодаря превосходным эксплуатационным характеристикам
и широкому выбору конфигураций и дополнительных
устройств CIMR F7 может
оказаться основной или единственной маркой инвертора,
используемой по всему предприятию. Пользователю
предлагаются модели, отличающиеся мощностью и типом
корпуса, а также различные сетевые протоколы,
подключаемые карты входов/выходов и специализированное
программное обеспечение. И при создании новых, и при
модернизации старых систем инвертор
CIMR-F7 - это незаменимый помощник, которому по
плечу не только любые типовые задачи, но даже и
некоторые не типовые.
Векторное
управление по потоку. Превосходные параметры в режиме
регулирования с разомкнутым контуром: крутящий момент
150% при частоте 0.5 Гц
Бесшумная работа.
Режим бесшумной работы без снижения тока (за счет
повышения несущей частоты)
Широкий выбор
дополнительных карт: сетевые интерфейсы, функции ПЛК,
интерфейс Mechatrolink, аналоговые и дискретные
входы/выходы и т.п.
Программное
обеспечение для программирования: CX-drive для настройки
параметров
CASE (прикладное
программное обеспечение для инверторов) и дополнительная
карта с функциями ПЛК
PG speed
controller card
(Used for V/f control with
PG or flux vector)
Phase A
pulse (single pulse) inputs
(voltage, complementary,
open collector input)PG
frequency range: approx. 30
kHz max.
[Power supply output for PG:
+12 V, max. current 200 mA]
Pulse monitor output: +12 V,
20 mA
PG-B2 /
3G3FV-PPGB2
Phase A
and B pulse inputs (exclusively
for complementary input)
PG frequency range: approx.
30 kHz max.
[Power supply output for PG:
+12 V, Max. current 200 mA]
Pulse monitor output: Open
collector, +24 V, Max.
current 30 mA
PG-D2 /
3G3FV-PPGD2
Phase A
pulse (differential pulse)
input for V/f control
(RS-422 input)
PG frequency range: approx.
300 kHz max.
[Power supply output for PG:
+5 V or +12 V, Max. current
200 mA]
Pulse monitor output: RS-422
PG-X2 /
3G3FV-PPGX2
Phase A,
B and Z pulse (differential
pulse) inputs (RS-422 input)
PG frequency range: approx.
300 kHz max.
[Power supply output for PG:
+5 V or +12 V, Max. current
200 mA]
Pulse monitor output: RS-422
PG-Z2
Phase A,
B and Z pulse (differential
pulse) inputs (RS-422 input)
PG frequency range: approx.
300 kHz max.
[Power supply output for PG:
+5 V or +12 V, Max. current
200 mA]
Pulse monitor output: RS-422
Dual channel encoder: 1st
channel A, B, Z / 2nd
channel A, B, Z or open
collector
Коммуникационные платы
Model
Description
Function
3G3RV-PDRT2
DeviceNet
option card
Used for
running or stopping the
inverter, setting or
referencing parameters, and
monitoring output frequency,
output current, or similar
items through DeviceNet
communication with the host
controller.
SI-P1
PROFIBUS-DP option card
Used for
running or stopping the
inverter, setting or
referencing parameters, and
monitoring output frequency,
output current, or similar
items through PROFIBUS-DP
communication with the host
controller.
SI-S1
CANopen
option card
Used for
running or stopping the
inverter, setting or
referencing parameters, and
monitoring output frequency,
output current, or similar
items through CANopen
communication with the host
controller.
SI-J
LONWORKS
option card
Used for
HVAC control, running or
stopping the inverter,
setting or referencing
parameters, and monitoring
output current, watt-hours,
or similar items through
LONWORKS communications with
peripheral devices.
CM090
Ethernet
option card
MODBUS
TCP/IP Ethernet interface
unit.
SI-T
MECHATROLINK-II
option board
High
speed motion bus.Used for
running or stopping the
inverter, setting or
referencing parameters, and
monitoring output frequency,
output current, or similar
items through
MECHATROLINK-II
communication with the host
controller.
Host controller : Trajexia,
MCH or MP Series
Опциональная плата задания
Model
Description
Function
AI-14U /
3G3IV-PAI14U
Analog input
card
2 channel
high resolution analog input
cardChannel 1: 0 to 10 V
(20KO)Channel 2: 4 to 20 mA
(250 O) Resolution 14 bit
AI-14B /
3G3IV-PAI14B
3 Channel
high resolution analog input
cardSignal level: -10 to
+10V (20 KO)4 to 20 mA (250
O) Resolution: 13 bit + sign
DI-08 /
3G3IV-PDI08
Digital
reference card
8 bit
digital speed reference
input card
DI-16H2 /
3G3IV-PDI16H2
16 bit
digital speed reference
input card
Опциональные платы ПЛК
Model
Description
Function
3G3RV-P10ST8-E
PLC option
Full PLC
featrues, wireless
installation and seamless
access to the inverter
parameters and analogue/digital
inputs and outputs.
Embedded Compubus/S
fieldbusStandard OMRON tools
can be used for programming
3G3RV-P10ST8-DRT-E
PLC
option with DeviceNet
Same
features than standard model
with DeviceNet support.
Цифровые
панели оператора
Model
Description
Function
JVOP-160-OY
5 lines LCD
digital operator7 Language
support
Configuration
and monitoring device
JVOP-161-OY
7 segment
LED digital operator
Кабели
Model
Description
Function
3G3IV-PCN126
3G3IV-PCN326
Digital
operator extension cable
1 meters
3 meters
Cable to
connect the inverter and the
digital operator when it's
not plugged into the
inverter