Преобразователь
частоты (инвертор) фирмы Omron CIMR-E7
OMRON CIMR-E7 - Регулятор скорости вращения (инвертор) Varispeed
E7
Инвертор
для насосов и вентиляторов
Инвертор OMRON CIMR-E7 предназначен для управления нагрузкой с
переменным моментом, такой как вентиляторы и
центробежные насосы. Он реализует вольт-частотное
регулирование (V/f), а его перегрузочная способность в
режиме обычной нагрузки составляет 110% в течение 1
минуты. Уникальная особенность CIMR E7 - специальный
алгоритм энергосбережения, позволяющий дополнительно
экономить до 20% электроэнергии. При использовании
дополнительного входного фазосдвигающего трансформатора
двухдиодный мост инвертора E7 может работать в режиме
12-пульсового выпрямления, чем достигается снижение
нелинейных искажений входного тока.
Инвертор CIMR-E7 со
степенью защиты IP54 с прочным металлическим шасси и
встроенным фильтром радиопомех
Адаптивный алгоритм
энергосбережения
Бесшумная работа
12-пульсное
выпрямление для снижения гармоник тока
Программное
обеспечение для программирования: CX-drive для настройки
параметров
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through DeviceNet communication with the host controller.
SI-P1
PROFIBUS-DP option card
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through PROFIBUS-DP communication with the host controller.
SI-S1
CAN open option card
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through CANopen communication with the host controller.
CM090
Ethernet option card
MODBUS TCP/IP Ethernet interface unit.
SI-J1
LONWORKS option card
Used for HVAC control, running or stopping the inverter, setting or referencing parameters, and monitoring output current, watt-hours, or similar items through LONWORKS communications with peripheral devices.
Опциональные
платы
ПЛК
Model
Description
Function
3G3RV-P10CDT-E
PLC option
Full features, wireless installation and seamless access to the inverter parameters and analogue / digital inputs and outputsEmbedded Compobus/S fieldbus.
Standard OMRON tools can be used for programming
3G3-P10CDT-E-DRT
PLC option with DeviceNet
Same features than standard models with DeviceNet support.
Цифровые
панели
оператора
Model
Description
Function
JVOP-160-OY
5 lines LCD digital operator *1
Configuration and monitoring device.
JVOP-161-OY
7 segment LED digital operator
JVOP-162
Hand-Off auto operator
*1
LCD
digital
operator
is the
standard
in IP54
types
Кабели
Model
Description
Function
3G3IV-PCN126
3G3IV-PCN326
Digital operator extension cable
1 meter
3 meters
Cable to connect the inverter and the digital operator when it's not plugged into the inverter.